Refer to the following topics to set up the Multi-Emitter Generation Software system.

Installing Multi-Emitter Generation Software
Use Package Manager to install Multi-Emitter Generation Software on your system.
Activating Multi-Emitter Generation Software
You need a license for each RF channel in the system. Each RF channel consists of a PXIe-7903 coprocessor and PXIe-5842 VST pair.
Installing the Hardware Components
Set up the hardware components in the PXI chassis.
Interconnecting the VSTs
Connect the PXIe-5842 and individual modules that are necessary for the functionality of the overall instrument.
Cabling the VST and Coprocessor
Pair each VST with a coprocessor.
Configuring the System Instruments
Use Hardware Configuration Utility to configure your VSTs and validate your configuration.
Setting up the RAID Configuration
NI recommends that you configure the PXIe-8267 as a striped volume that consists of disks 1 through 4.
Naming Instruments in the System
Use Hardware Configuration Utility to create aliases for instruments that are used and controlled by the Multi-Emitter Generation Software.
Setting up Multi-Chassis Systems
Cable and configure the multi-chassis system.
Optimizing RF Performance
The Multi-Emitter Generation Software system requires up to two steps depending on the configuration of your system.

Multi-Emitter Generation Software User Manual