Setting Up the ECUTS

Refer to the topics in this section to set up the ECUTS-16000.

Installing the Monitor and Monitor Arm

The ECUTS-16000 includes a monitor as well as a monitor arm with a keyboard tray. Complete the following steps to install the monitor and monitor arm:

  1. Refer to the Ergomart TRS7000 Monitor Arm Installation Instructions to attach the monitor arm to the ECUTS-16000 mounting cylinder.
  2. Connect the computer monitor to the ECUTS-16000 DisplayPort, USB, and AC power cables located on top of the test rack.
  3. Connect a USB keyboard and mouse to the monitor USB ports.

Installing the 9025TR Platform

If you have an ECUTS with a 9025TR mass interconnect, you must attach the accompanying 9025TR platform. Refer to the Virginia Panel Corporation 9025 User Manual to attach the 9025TR platform.

(Optional) Connecting to Facility Compressed Air

Complete the following steps to connect the ECUTS to the facility compressed air.

The ECUTS does not ship ready for use with facility compressed air. Do not connect the ECUTS to the facility compressed air unless the pneumatics have been configured.

Equipment

  • 6 mm outer diameter air hose
  1. Connect a 6 mm outer diameter air hose to the pneumatic air port.
  2. Turn on the facility compressed air connected to the ECUTS.