Use the LockAny module to set an unlock flag after verifying a password. For example, a user box opens only after you enter the correct password.

You can also group test benches. For example, all gearbox test benches can use the same password, and each engine test bench can use its own password.

LockAny Module Configuration

The configuration is done in the group of Initialization of variables called LockAny.

FAQs

Are there any restrictions on how the password is structured?

Yes, the password must consist of at least 6 characters.

Are certain dates and time strings mandatory to form the correct times?

Yes, the norm name PAtime [s] must be provided by the application and the necessary calculations must be carried out on this norm name.

Opening the LockAny Dialog

There are several ways to open the user interface for password protection management, depending on the customer-specific implementation.

You can access the LockAny tab in the userbox add-on area in the main control window of the application.

You can also select the LockAny button on the Software tab.

Locking and Unlocking the Dialog Window

Complete the following steps to lock and unlock the dialog window.
  1. If you are locking the dialog for the first time, enter the password you want to use in New password field.
    Important The password must consist of at least 6 characters.
  2. Enter the same password in the Repeat password field.
  3. Click the lock icon.
    Access to dialog window is locked and only possible with the password. After you set the initial password, the password is retained in the system unless you change it.
  4. To unlock the dialog window, enter the password when prompted.

Changing the Password

  1. When you have to change the password, click the button on the bottom right of the LockAny tab.
  2. Enter the old, new and repeated password in the corresponding fields, confirming each input by clicking Enter.
    The interface changes and indicates that changing the password was successful.