Calibrating Multiple Channels Simultaneously

Calibrate more than one channel at the same time.

Introduced in FlexLogger 2019 R4

  1. In your Channel Specification document, select all configured channels you wish to calibrate.
  2. In your Channel Specification document toolbar, click Calibrate channels .
  3. Select one of the following calibration options:
    OptionDescription
    Zero To get a zero reading, apply an offset to the analog input channels. Zero calibration is only available for Linear and Sensitivity scaling types.
    Null offset Perform offset nulling calibration on the strain channels to adjust the output of the bridge to 0 V.
    Shunt calibrate Adjust for errors on your bridge circuits caused by resistance of the lead wires between the EX pins on the device and the strain gage. For more information, refer to Shunt Calibrating One or More Channels.
FlexLogger automatically applies the selected offset to all selected channels that support the calibration type.
Note You cannot apply calibration to multiple channels when the test is running.