The Parameters tab in the Voltage Probe Properties dialog box contains the following:

  Element   Description
Dependent on parameter mode Select to use the parameter mode chosen in the Parameters tab of the Probe Settings dialog box.
Custom Select to edit the parameters available in the table. See below for descriptions.
Show

Select to show all Custom parameters. Deselect to hide all of them.

To hide an individual parameter (for example, V(p-p)), click beside the desired parameter in the Show column to toggle to No.
Minimum and Maximum Use to set a parameter's range. Measured values below Minimum display "0", Measured values above Maximum display "--E--".
Precision The number of significant digits for a displayed parameter.
Parameter Name V—Instantaneous voltage.
V(p-p)—Peak-to-peak voltage.
V(dc)—DC voltage.
V(rms)—RMS voltage.
V(freq)—Frequency of the voltage signal/waveform.
V(period)—Period of the voltage signal/waveform.
V(gain_DC)—The gain between the DC voltage values of primary probe and a Gain/Phase reference probe.
V(gain_AC)—The gain between the peak voltage values of the primary probe and a Gain/Phase reference probe.
V(phase)—The voltage phase difference between the primary probe primary probe and a Gain/Phase reference probe.