This file contains important information about the Modulation Toolkit, including installation instructions, new features, bug fixes for Modulation Toolkit 19.0, and known issues.
Modulation Toolkit provides signal generation and analysis capabilities for analog and digital modulation schemes.
Modulation Toolkit 19.0 supports the following operating systems:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note Refer to Modulation Toolkit Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support.
Note In 2016, Modulation Toolkit dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. Modulation Toolkit 19.0 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use Modulation Toolkit 19.0 to an unsupported OS. Additionally, after installing Modulation Toolkit 19.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
Modulation Toolkit 19.0 supports the following application software versions, including service packs.
Modulation Toolkit is available for download from http://www.ni.com/en-us/support/downloads/software-products
Device-specific information about these modules is included in the NI RF Signal Generators Help.
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
Device-specific information about these modules is included in the NI High-Speed Digitizers Help.
No known issues in Modulation Toolkit 19.0.
The following items are the IDs and titles of a subset of issues fixed in the Modulation Toolkit. This is not an exhaustive list of issues fixed in the current version of the Modulation Toolkit. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
The following items are changes in Modulation Toolkit 15.0 from Modulation Toolkit 4.4.
|521869||Fixed an issue where the MT examples for NI-Scope had an NI-RFSA dependency.|
|525695||Fixed an issue where OQPSK intermittently reported NaN as the result for the I/Q Gain Imbalance and the Quadrature Skew measurements.|
|508707||Fixed an issue where intermittent loss of samples occurred during continuous digital demodulation.|
The following items are changes in Modulation Toolkit 4.4 from Modulation Toolkit 4.3.4.
|389508||Fixed DWarn 0x262C7578.|
|402017||Fixed an issue where MSK demodulation returned a high EVM.|
|462305||Fixed an issue where MSK recovered an incorrect constellation when the pulse shaping filter was set to None.|
|362507||Fixed an issue where installing MT 4.3.3 did not install the digital modulation related files on LabVIEW 2012.|
|404991||Fixed an issue where controls could not be created for the Modulation Toolkit classes.|
|415930||Fixed an issue where the OQPSK demodulation did not lock to the constellation consistently.|
|426459||Fixed an issue where EVM variations were observed in 8-PSK and 16-PSK demodulation.|
The following items are changes in Modulation Toolkit 4.3.4 from Modulation Toolkit 4.3.3.
|362507||Fixed an issue where installing Modulation Toolkit 4.3.3 did not install Digital Modulation Toolkit VIs on LabVIEW 2012.|
|374121||Fixed an issue where Modulation Toolkit did not install on LabVIEW 2012.|
|404822||Fixed an issue where multiple shortcuts to documents were present in the Start Menu folder for the Modulation Toolkit.|
Refer to the Modulation Toolkit Help, accessible from Start»National Instruments»Modulation Toolkit»Modulation Toolkit Documentation, for information about the Modulation Toolkit Help.
In LabVIEW, you can use the NI Example Finder to search or browse examples. Modulation Toolkit examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and Modulation Toolkit examples) and their descriptions:
You can also access all the installed Modulation Toolkit examples for LabVIEW at Start»National Instruments»Modulation Toolkit»Modulation Toolkit Examples.
Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Modulation Toolkit are located in the labview\examples\Modulation directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Modulation Toolkit will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, will not install or run on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
© 2002–2019 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.