The Parameters tab in the Current Probe Properties dialog box contains the following:

  Element   Description
Dependent on parameter mode Select to use the parameter mode chosen in the Parameters tab of the Probe Settings dialog box.
Custom Select to edit the paraeters available in the table. See below for descriptions.
Show

Select to show all Custom parameters. Deselect to hide all of them.

To hide an individual parameter (for example, I(p-p)), click beside the desired parameter in the Show column to toggle to No.
Maximum and Minimum Use to set a parameter's range. Measured values below Minimum display "0", Measured values above Maximum display "--E--".
Precision The number of significant digits for a displayed parameter.
Parameter Name I—Instantaneous current.
I(p-p)—Peak-to-peak current.
I(dc) —DC current.
I(rms) —RMS current.
I(freq)—Frequency of the current waveform/signal.
I(period)—Period of the current waveform/signal.
I(gain_DC)—The gain between the DC current values of primary probe and a Gain/Phase reference probe.
I(gain_AC)—The gain between the peak current values of the primary probe and a Gain/Phase reference probe.
I(phase) —The current phase difference between the primary probe primary probe and a Gain/Phase reference probe.