Get Time Set Edge
- Updated2023-02-17
- 2 minute(s) read
Get Time Set Edge
Returns the edge time of a pin in the specified time set.
Inputs/Outputs
session in
Instrument session obtained from the niDigital Initialize with Optionsnode.
pin
Name of the specified pin.
You define valid values for this parameter in the pin map.
time set
The specified time set name.
edge
Name of the edge.
| NIDIGITAL_VAL_DRIVE_ON | 2800 |
| NIDIGITAL_VAL_DRIVE_DATA | 2801 |
| NIDIGITAL_VAL_DRIVE_RETURN | 2802 |
| NIDIGITAL_VAL_DRIVE_OFF | 2803 |
| NIDIGITAL_VAL_COMPARE_STROBE | 2804 |
| NIDIGITAL_VAL_DRIVE_DATA_2 | 2805 |
| NIDIGITAL_VAL_DRIVE_RETURN_2 | 2806 |
| NIDIGITAL_VAL_COMPARE_STROBE_2 | 2807 |
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
session out
Handle that identifies the session in all subsequent NI-Digital node calls.
time
Time from the beginning of the vector period in which to place the edge.
error out
Error information.
The node produces this output according to standard error behavior.