LabVIEW 2022 Q3 Known Issues

Overview

This document contains the LabVIEW known issues that were discovered before and since the release of LabVIEW 2022 Q3. Known issues are performance issues or technical bugs that NI has acknowledged exist within this version of the product.

 

Not every issue known to NI appears on this list; it is intended to show the most severe and common issues that you may encounter and provide workarounds when possible. Other technical issues that you may encounter could occur through normal product use or system compatibility issues. You may find more information on these issues in NI’s Product Documentation, Knowledgebase, or Community; see Additional Resources.

Bug Number

Legacy ID

Description

Details

LabVIEW 2022 Q3 Documentation Contains Content from LabVIEW 2021

The LabVIEW 2022 Q3 Help includes the same contents as the LabVIEW 2021 Help. The Help does not describe any new features or changes in the functionality.

Workaround:

For information about the new and changed functionality in LabVIEW 2022 Q3, please refer to https://www.ni.com/docs/en-US/bundle/upgrading-labview/.

Reported Version:

LabVIEW 2022 Q3

Resolved Version:

N/A

Added:

Jul 27, 2022

2065508

Using the DAQAssistant with DAQmx 2022 Q3 on LabVIEW 2022 Q3 Fails to Generate Code

Using the DAQAssistant on LabVIEW 2022 Q3 with DAQmx 2022 Q3 installed fails to configure the DAQAssistant node and gives the following code generation error:
"LabVIEW Code Generation failed to execute. This may occur if the code gen engine is not properly installed, or if you are using a LabVIEW version under development" . 

Other workflows that use the DAQ Assistant to generate DAQmx tasks also fail.

Workaround:

Install LabVIEW 2021 SP1

  • LabVIEW 2021 SP1 does not need to be activated, it is sufficient to install LabVIEW 2021 on your system and not activate it
  • Installing just the LabVIEW 2021 SP1 run-time engine will not be sufficient, the LabVIEW ADE needs to be installed 

Reported Version:

NI-DAQmx 2022 Q3

Resolved Version:

N/A

Added:

Aug 2, 2022

2051887

LabVIEW Offline Help Is Unavailable on Windows Server 2016

Workaround:

Use the online help from ni.com.

Reported Version:

LabVIEW 2022 Q3 | Software Platform Bundle 2022 Q3

Resolved Version:

N/A

Added:

Jul 27, 2022

2062084

CompactRIO Single Board Controllers with NI-DAQmx Support and Real-Time Scan Resources Will Fail to Compile Bitfiles on LabVIEW 2022 Q3

Compilation failures with timing violations are likely to occur for users with C Series modules under Real-Time Scan Resources.The targets affected are sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9626, sbRIO-9629, sbRIO-9638.

Workaround:

Use LabVIEW 2021 or earlier for these targets

Reported Version:

NI CompactRIO 2022 Q3

Resolved Version:

N/A

Added:

Aug 2, 2022

2057366

Loading a Project Containing RT CompactDAQ Target on LabVIEW 2022 Q3 when LabVIEW RT is Not Installed Crashes LabVIEW

Consider a case where LV 2022 Q3 and DAQmx 22.8 are installed, but not LabVIEW Real-Time. When trying to create a new project and adding an RT CompactDAQ Target to the project, clicking on the newly added target causes LabVIEW to churn for a few seconds and then crash.

Steps to reproduce:
  • Install LV 2022 Q3 and DAQmx 22.8.  Do not install LabVIEW Real-time.
  • Create a new project
  • Add an RT CompactDAQ Target to the project
  • Click on the newly added Target.  LabVIEW will churn away for a bit and then crash.

Workaround:

Install LabVIEW Real-Time on the system and re-open the project

Reported Version:

NI-DAQmx 2022 Q3

Resolved Version:

N/A

Added:

Aug 2, 2022

2081071

LabVIEW Occasionally Crashes the Running System Exec Call That Produces Error Output

LabVIEW occasionally crashes when running the System Exec, if the executed command produces a large amount of stderr output.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

LabVIEW 2022 Q3

Resolved Version:

N/A

Added:

Jul 27, 2022

2052750

Same Version of LabVIEW Is Listed Twice in Software Section of NI MAX

Workaround:

There is currently no known workaround for this issue.

Reported Version:

LabVIEW 2022 Q3

Resolved Version:

N/A

Added:

Jul 26, 2022

2081644

Some Localized Examples Are Missing in Example Finder

Workaround:

Copy the contents of the localized exbins folders (such as C:\Program Files (x86)\National Instruments\Shared\Example Finder\1.0\Products\LabVIEW\22.0\exbins\Chinese) into the English folder (C:\Program Files (x86)\National Instruments\Shared\Example Finder\1.0\Products\LabVIEW\22.0\exbins\English), and delete the localized folders.

Reported Version:

LabVIEW FPGA Module 2022 Q3

Resolved Version:

N/A

Added:

Jul 26, 2022

Final Time Issue Listed

Issues found in this section will not be listed in future known issues documents for this product.

There are currently no issues to list.

Additional Resources

Explore Support Content and Product Documentation 

 

 

Ask the NI Community

 

 

Request Support from an Engineer

 

A valid service agreement may be required, and support options vary by country

 

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).