Archived: OPC Data Access Compatibility

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

OPC is an open industry standard device interface that provides interoperability between disparate field devices, automation control systems, and business systems. OPC-DA is based on ActiveX, OLE, COM and Distributed COM technologies. You can find more details at the OPC Foundation Web site, https://opcfoundation.org/, or the NI OPC Web site. The following tables give details about NI products and OPC compatibility.

NI OPC-DA Client Interfaces

 

 OPC-DA 1.0OPC-DA 2.0OPC-DA 3.0
DataSocket APIX
Lookout (5.1)X
Lookout (6.2 and higher)
Shared Variable OPC Client I/O Server (LabVIEW DSC 8x)X



NI OPC-DA Server Interfaces

 

 OPC 1.0AOPC 2.0 OPC-DA 3.0
NI-DAQ 6.8XX
NI-DAQ 6.9X
NI-DAQmxX
LabVIEW DSC Module 6.x and 7.xX
Lookout 6.2+
FieldPoint 2.0.2 (and higher)XX
NI-FBUS 2.3.5XX
Shared Variable Engine with DSC 8 Module (and higher)X



Note: OPC Unified Architecture (UA) servers/clients are not compatible with OPC-DA interfaces.

Was this information helpful?

Yes

No