Table Of Contents

Downloading Support Files in MAX

Last Modified: June 10, 2021

Before you can deploy VIs or a system definition file to a real-time target, use NI Measurement & Automation Explorer (MAX) to download support files.

  1. Launch MAX.
  2. In the configuration tree, click Remote Systems.
  3. Select the real-time target you want to deploy to and click Software.

    If the real-time target does not have a Software category, then it does not support the required software.

  4. On the toolbar, click Add/Remove Software to launch the LabVIEW Real-Time Software Wizard.

    You will be prompted to enter the real-time system's administrator name and password if it has one. For more information, refer to the Logging into your System topic in the Measurement & Automation Explorer Help.

  5. Optional: Select Custom software installation (currently installed) and click Next to install recommended software if prompted.
  6. Click the icon next to VeriStand RT Engine.
  7. Select Install the feature and click Next.
  8. Confirm that you want to install VeriStand support and click Next.
MAX displays the progress of the installation and reboots the target so it is ready for a system definition file.

Recently Viewed Topics