Table Of Contents

Managing Asset Utilization Tracking on a Client

Version:
    Last Modified: November 7, 2019

    Automatically track asset utilization when you log into a client system to minimize unwanted changes to VIs or scripts.

    spd-note-note
    Note  

    Your client system must have Windows installed to automatically track asset utilization.

    1. Log into the client system.
    2. On the Windows toolbar, right-click NI SystemLink Notifications in the system tray.
    3. Refer to the following table to enable, disable, or modify asset utilization tracking on the client.
      Goal Instructions
      Enable automatic asset utilization tracking
      1. Click Automatically Start Asset Utilization»Enable Automatic Tracking.
      2. Select either All assets or System Controller.

      The client system tracks the asset(s) you selected until you lock, log out, close the remote session, or shut down the system.

      Disable automatic asset utilization tracking
      1. Click Automatically Start Asset Utilization»Disable Automatic Tracking.
      2. Click Yes.

      The client system stops tracking the asset(s) you selected.

      Modify the asset(s) you track
      1. Click Automatically Start Asset Utilization»Disable Automatic Tracking.
      2. Click Yes.
      3. Click Automatically Start Asset Utilization»Enable Automatic Tracking.
      4. Select All assets or System Controller.

      The client system tracks the asset(s) you selected until you lock, log out, close the remote session, or shut down the system.

    The next time you log into the client system, the type of asset utilization you configured persists.

    Recently Viewed Topics