Table Of Contents

Assembling System Components

Version:
    Last Modified: July 30, 2021

    Complete the following steps to assemble and install the hardware components included in your system design.

    1. Mount the instrumentation.
      Model Where to Go
      cDAQ-9189 Mounting the cDAQ-9185/9189 in the cDAQ-9185/9189 User Manual
      cRIO-9805 Expansion Module for CompactRIO User Manual
      PS-14 Mounting Equipment and Mounting Orientation and Installation in the NI PS-14 Power Supply User Manual
      PS-15 Mounting Equipment and Mounting Orientation and Installation in the NI PS-15 Power Supply User Manual
      PS-16 Mounting Equipment and Mounting Orientation and Installation in the NI PS-16 Power Supply User Manual
    2. Ground the CompactDAQ chassis and Ethernet switches.
      Model Where to Go
      cDAQ-9189 Installing the cDAQ Chassis and Chassis Grounding Screw in the cDAQ-9185/9189 User Manual
      cRIO-9805 Grounding the Expansion Module for CompactRIO Expansion Module for CompactRIO User Manual
    3. Install the C Series modules in the CompactDAQ chassis.
      Model Where to Go
      cDAQ-9189 Installing the cDAQ Chassis and Removing Modules from the cDAQ Chassis in the cDAQ-9185/9189 User Manual
    4. Install network cables according to your system design.
    5. Install power cabling to all instruments and Ethernet switches.
      Model Where to Go
      cDAQ-9189 Wiring External Power to the cDAQ Chassis in the cDAQ-9185/9189 User Manual
      cRIO-9805 Connecting the cRIO-9805 to an External Power Supply in the Expansion Module for CompactRIO User Manual
    6. Connect all sensor wiring to the C Series modules.
      Model Where to Go
      NI-9213 Connecting a Thermocouple in the NI-9213 Getting Started Guide
      NI-9215 NI-9215 Pinout in the NI-9215 Getting Started Guide
      NI-9235 Connecting a Quarter-Bridge Sensor in the NI-9235 Getting Started Guide
      NI-9236 Connecting a Quarter-Bridge Sensor in the NI-9236 Getting Started Guide
    7. Visually inspect the LED indicators on the instrumentation to verify power.
      Model Where to Go
      cDAQ-9189 cDAQ-9189 Front Panel in the CompactDAQ Chassis Manual
      cRIO-9805 cRIO-9805 LEDs in the Expansion Module for CompactRIO Manual
      PS-14 DC On LED in the NI PS-14 Power Supply User Manual
      PS-15 DC OK LED in the NI PS-15 Power Supply User Manual
      PS-16 DC OK LED in the NI PS-16 Power Supply User Manual
    8. Download and install the Static Test Software on the host PC from ni.com/downloads.
      spd-note-note
      Note  

      Refer to the Static Test Software Readme at ni.com/r/sstreadme for more information about installing and activating the software included in the Static Test Software.


    Recently Viewed Topics