If your FieldDAQ device becomes disconnected from the network, open MAX and try the following:
-
After moving the device to a new network, NI-DAQmx may lose connection to the device. In this case, click
Reconnect to provide NI-DAQmx with the new hostname or IP address.
-
The FieldDAQ device icon indicates whether it is recognized and present on the network. If a connected device appears as disconnected
in the configuration tree in MAX, select
Self-Test or
Reset. If successful, the device icon changes to dark grey.
For additional troubleshooting resources for the FieldDAQ device, refer to the
Finding a Network DAQ Device in MAX topic in the
Measurement & Automation Explorer Help for NI-DAQmx.