Table Of Contents

DAQmx Initialize External Calibration (G Dataflow)

Last Modified: July 19, 2019

Starts an external calibration session on a device.


device in

device in is the name as configured in MAX of the device to which this operation applies. A DAQmx device name constant lists all devices installed in the system.



password is the current calibration password for the device. This password is case sensitive.

The default password for SCXI-15xx devices is SCXI. The default password for all other NI products is NI.


error in

error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.


calHandle out

calHandle out is a reference to the calibration session. Wire this output to other external calibration nodes.


error out

error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

Where This Node Can Run:

Desktop OS: Windows

FPGA: LabVIEW NXG does not support FPGA devices

Web Server: Not supported in VIs that run in a web application

Recently Viewed Topics