From 9:00 AM - 12:00 PM CDT on Saturday, June 6th, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

Waveform Nodes (G Dataflow)

Last Modified: August 21, 2019

Create waveforms and access their components.

node_icon
Replaces the timestamp value (t0) of each waveform in waveform array with the timestamp value of the waveform at the index position you specify.
node_icon
Converts an analog waveform to a digital waveform or digital data.
node_icon
Replaces the dt value of each waveform in the waveform array with the dt value of the waveform at the index position you specify.
node_icon
Converts a digital waveform or digital data to an analog waveform.
node_icon
Returns the ending time value of the specified waveform. The formula this node uses is xf = x0 + duration of the specified waveform.
node_icon
Retrieves a subset of a waveform at a specified time or index.
node_icon
Creates an array of timestamps based on the specified waveform.
node_icon
Returns the X and Y value of a waveform or digital data set.
node_icon
Selects one waveform out of an array of analog or digital waveforms by array index or channel name.
node_icon
Multiplies the delta t component of the waveform by the specified scale factor, which lengthens or shortens the sample rate of the waveform.
node_icon
Computes the duration of the specified waveform using the following equation: duration = (number of samples-1) x dx.
node_icon
Create analog waveforms and access their components.
node_icon
Create digital waveforms and access their components.
node_icon
Convert to and from digital data.

Recently Viewed Topics