This node accepts timestamp values if all inputs are timestamp values. If the inputs are timestamp values, the function returns the later time at the top and the earlier time at the bottom. You can change the comparison mode of this node.
In Compare Elements mode, when one or both inputs are NaN (Not-a-Number), this function produces the following results:
In Compare Aggregates mode, when one or both inputs are NaN (Not-a-Number), this function produces the following results:
When using Max and Min to compare arrays and clusters, you can select a comparison mode. Note that Max and Min produces a different type of output than other Comparison nodes in each of the two comparison modes. In Compare Elements mode,Max and Min returns an array or cluster of the maximum elements and minimum elements. In Compare Aggregates mode,Max and Min returns the maximum and minimum array and cluster.
|Parameters||Compare Elements||Comments||Compare Aggregates||Comments|
|First input array (x)||[3,2,3,4]||[3,2,3,4]|
|Second input array (y)||[2,3,4,5]||[2,3,4,5]|
|Maximum (max)||[3,3,4,5]||The node returns an array of the maximum elements from the two input arrays.||[3,2,3,4]||Because the first elements of the two input arrays are not equal, and because 3>2, the node stops and returns [3,2,3,4] as the maximum array.|
|Minimum (min)||[2,2,3,4]||The node returns an array of the minimum elements from the two input arrays.||[2,3,4,5]||Because the first elements of the two input arrays are not equal, and because 2<3, the node stops and returns [2,3,4,5] as the minimum array.|
Where This Node Can Run:
Desktop OS: Windows
FPGA: All devices (only within an optimized FPGA VI)
Web Server: Supported in VIs that run in a web application