NI-7932 Front Panel Connector Descriptions

The following figure shows the front panel connectors, buttons, and LEDs.


1378

  1. TRIG
  2. REF IN
  3. µSD card
  4. USB device port
  5. USB host
  6. 1 Gigabit Ethernet
  7. LED indicators
  8. Reset
  9. DC power source
  10. FlexRIO adapter module connector
  11. SFP+ connectors
Table 3. Front Panel Connectors
Connector Function
SFP+ connectors Allow access to the multi-gigabit transceivers (MGTs).
TRIG Trigger input and output channel.
REF IN Reference clock input.
µSD card SD card slot that can read from and write to DC cards. Use an NI-approved SD card to improve the performance and memory integrity of the controller.
USB device port Intended for use in device configuration, application deployment, debug, and maintenance.
USB host Supports common USB mass-storage devices such as USB Flash drives.
1 Gigabit Ethernet Ethernet port.
Reset Pressing the RESET button resets the processor in the same manner as cycling power.

You can also use the RESET button to troubleshoot network connectivity. Refer to the MAX Help for FlexRIO for more information about troubleshooting network issues.

DC power source Refer to the NI-7932 Getting Started Guide for information about wiring power to the device.
FlexRIO adapter module connector Refer to the NI-7932 Getting Started Guide for information about the NI-7932 adapter module connector pinout.