Use the VIs on this palette to use calibration.

RFmxVNA Calibration Abort VI
Stops the calibration, which was previously initiated by RFmxVNA Calibration Initiate VI, for the signal instance that you specify in the Selector String parameter. Calling this VI is optional, unless you want to stop a calibration before it is complete. This VI executes even if there is an incoming error.
RFmxVNA Calibration Acquire VI
Measures one or more calibration standards for the specified calibration step.
RFmxVNA Calibration Initiate VI
Determines the set of calibration standard measurements required for performing calibration with the sweep and calibration settings that you configure. Call this VI after configuring all the appropriate sweep and calibration settings such as Frequency Settings, Power Level and Test Receiver attenuation settings, IF Bandwidth, Calkit and Cal Method related settings etc.
RFmxVNA Calibration Save VI
Computes error-correction terms and saves the calset in memory. Call this VI after all calibration standards have been measured using RFmxVNA Calibration Acquire VI.
RFmxVNA Auto Detect vCal Orientation VI
Automatically detects the vCal ports connected to the VNA ports and writes the vCal Orientation property. Call this VI before calling RFmxVNA Calibration Initiate VI.
Calkit Manager
Use the VIs on this palette to configure calkit manager.

Parent topic: VNA

RFmx VNA LabVIEW Reference

Log in to get a better experience