Computes error-correction terms and saves the calset in memory. Call this VI after all calibration standards have been measured using RFmxVNA Calibration Acquire VI.

If you do not specify Calset Name input parameter, the calset is saved as default calset for the specified signal and is not available for use in other signals. If you specify non-empty Calset Name string, calset is saved as a named calset available for use across all signals and is also selected as the active calset for the current signal.

Note To perform another calibration after you call this VI, you must call RFmxVNA Calibration Initiate VI again.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Example:

    ""

    "signal::mysignal1"

    You can use the RFmxVNA Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum.

  • cstr.png Calset Name —

    Calset Name specifies the name of the calset. If you do not specify this parameter, the calset is saved as default calset for the specified signal and is not available for use in other signals. If you specify non-empty Calset Name string, calset is saved as a named calset available for use across all signals and is also selected as the active calset for the current signal.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out returns error information.