Verifying Hardware Installation for Remote Systems
- Updated2023-02-20
- 1 minute(s) read
Verifying Hardware Installation for Remote Systems
You can verify that the system recognizes the NI PXIe-7865 by using Measurement & Automation Explorer (MAX).
- Launch MAX on the host computer.
- Expand Remote Systems in the configuration tree and locate your system.
-
Install LabVIEW Real-Time Module2019 and NI R Series Multifunction RIO Device Drivers January 2020 or later on your
Remote System.
- Refer to the Installing Software on the Host Computer section for information about installing software on the host.
- Refer to the PXI Express Controllers User Manual at ni.com/manuals for information on installing software on the target.
-
Under
Remote Systems, find and expand
Devices and Interfaces.
If the device does not appear, press <F5> to refresh the view in MAX. If the device does not appear after refreshing the view, visit ni.com/support for troubleshooting information.