NI WLAN Analysis Toolkit

NI WLAN Analysis Toolkit Help

  • Updated2023-02-21
  • 2 minute(s) read

May 2020, 373724M-01

The NI WLAN Analysis Toolkit extends LabVIEW and LabWindows™/CVI™ functionality and provides tools and functions to perform measurements, including spectral analysis, burst power, direct sequence spread spectrum (DSSS) power ramp-up and ramp-down, DSSS demodulation, and OFDM demodulation on wireless local area network (WLAN) transceiver signals that conform to the following standards:

  • IEEE Standard 802.11a-1999
  • IEEE Standard 802.11b-1999
  • IEEE Standard 802.11g-2003
  • IEEE Standard 802.11j-2004
  • IEEE Standard 802.11n-2009
  • IEEE Standard 802.11p-2010
  • IEEE Standard 802.11ac-2013
  • IEEE P802.11ah/D1.3
  • IEEE Standard 802.11af-2013
  • IEEE P802.11ax/D6.0

Refer to the IEEE website to access these standards. This help file assumes you are familiar with the IEEE standards.

The following table lists the NI WLAN Analysis Toolkit licenses and the type of signals you can test using the VIs, properties, functions, and attributes available in the toolkit:

License Signals Conform to these IEEE Standards
NI WLAN Analysis Toolkit for IEEE 802.11a/b/g/j/n/p

IEEE Standard 802.11a-1999

IEEE Standard 802.11b-1999

IEEE Standard 802.11g-2003

IEEE Standard 802.11j-2004

IEEE Standard 802.11p-2010

IEEE Standard 802.11n-2009

NI WLAN Analysis Toolkit for IEEE 802.11a/b/g/j/n/p/ac

 

IEEE Standard 802.11a-1999

IEEE Standard 802.11b-1999

IEEE Standard 802.11g-2003

IEEE Standard 802.11j-2004

IEEE Standard 802.11p-2010

IEEE Standard 802.11n-2009

IEEE Standard 802.11ac-2013

NI WLAN Analysis Toolkit for IEEE 802.11ah IEEE P802.11ah/D1.3
NI WLAN Analysis Toolkit for IEEE 802.11af IEEE Standard 802.11af-2013.

NI WLAN Analysis Toolkit for IEEE 802.11a/b/g/j/n/p/ac/ax

 

IEEE Standard 802.11a-1999

IEEE Standard 802.11b-1999

IEEE Standard 802.11g-2003

IEEE Standard 802.11j-2004

IEEE Standard 802.11p-2010

IEEE Standard 802.11n-2009

IEEE Standard 802.11ac-2013

IEEE P802.11ax/D6.0

Note Note  Restart LabVIEW after activation.

This help file contains conceptual and programming reference information for the toolkit.

The NI WLAN Analysis Toolkit VIs are located on the Functions»RF Communications»WLAN»Analysis palette.

Log in to get a better experience