Use the NI-FGEN Configure Clock VIs to configure signal generator clocking and data generation speed.

niFgen Configure Sample Clock Source VI
Sets the source of the Sample clock (update clock) of the signal generator.
niFgen Configure Clock Mode VI
Selects the clock mode for the signal generator.
niFgen Set Sample Rate VI
Configures the sample rate, which determines the rate at which the signal generator produces arbitrary waveforms. When you configure the signal generator to produce an arbitrary sequence, this is the sample rate for all arbitrary waveforms in the sequence. If the update clock (Sample clock) source is external, setting the sample rate informs NI-FGEN of the external rate.
niFgen Configure Reference Clock VI
Configures the signal generator Reference clock source and frequency. The signal generator uses the Reference clock to tune the Sample clock timebase of the signal generator so that the frequency stability and accuracy of the Sample clock timebase matches that of the Reference clock.
niFgen Adjust Sample Clock Relative Delay VI
Delays (or phase shifts) the Sample clock, which delays the output of the module. Adjustment time can be positive or negative, but it must be less than or equal to the Sample clock period. The delay takes effect immediately after this VI is called.
niFgen Export Signal VI
Routes signals (clocks, triggers, and events) to the output terminal you specify.
5404 Routing
Use this VI to configure the routing of signals in the NI 5404 signal generator to RTSI lines and front panel connectors.

Parent topic: Configuration

NI-FGEN LabVIEW VI Reference

Log in to get a better experience