Create Capture Waveform (Parallel)
- Updated2023-02-17
- 2 minute(s) read
Create Capture Waveform (Parallel)
Sets the capture waveform settings for parallel acquisition.
Settings apply across all sites if multiple sites are configured in the pin map. You cannot reconfigure settings after waveforms are created.
Inputs/Outputs
waveform name
Waveform name you want to use.
Use the waveform name with the capture_start opcode in your pattern.
session in
Instrument session obtained from the niDigital Initialize with Optionsnode.
pin list
List of capture pins from the waveform.
The pin list must match the capture pins in the pattern that references the waveform. The pin order in the pin list determines the bit positions of the data captured by the niDigital Fetch Capture Waveform node.
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
session out
Handle that identifies the session in all subsequent NI-Digital node calls.
error out
Error information.
The node produces this output according to standard error behavior.