Spectral Measurements:TxSpectrum:Sweep Time (sec) Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: TxSpectrum Sweep Time (sec)
Property of niBTAnalysis
Specifies the sweep time for transmit spectrum measurements. This value is expressed in seconds.
The default value is 10 ms if you set the TxSpectrum Measurement Method property to FFT, and 5 ms if you set the TxSpectrum Measurement Method property to Sweep.
Remarks
The following table lists the characteristics of this property.
Datatype | ![]() |
Permissions | Read/Write |
High-level VIs | niBT SA TxSpectrum Set Sweep Time |
Resettable | Yes |