Object: DisplayObj
- Updated2024-09-12
- 2 minute(s) read
(Area | Areas | BirdsEyeView | Bode | Cascade | ChannelTable | Contour | CurveChart2D | Dialog | DisplayObj | Map | Orbit | Picture | Polar | ShaftCenterline | Sheet | TextBox | Video) > Area > Object: DisplayObj
Object: DisplayObj
The DisplayObj object provides the display type for an area in DIAdem VIEW.
The DisplayObj object corresponds to one of the following objects:
| Bode (IToBodeChartInt) | Bode Axis System |
| Cascade (IToCascadeChartInt) | Cascade display |
| ChannelTable (IToChannelTableInt) | Channel table |
| Contour (IToContourChartInt) | Contour display |
| CurveChart2D (ITo2DChartInt) | 2D axis system |
| Dialog (IToSudDlgInt) | Dialog box display |
| Map (IToMapDisplayInt) | Map display |
| Orbit (IToOrbitChartInt) | Orbit axis system |
| Picture (IToPictureInt) | Graphic |
| Polar (IToPolarChartInt) | Polar axis system |
| ShaftCenterline (IToShaftCenterlineChartInt) | Shaft centerline axis system |
| TextBox (IToTextBoxInt) | Textbox |
| Video (IToVideoInt) | Video |
| BirdsEyeViewObject (IToBirdsEyeViewObjectInt) | Bird's Eye View |
The following example creates a 2D axis system with a curve:
| VBScript | Python |
Dim oMySheet, oMyChart, oMyCurve Call Data.Root.Clear() Call DataFileLoad("Example.tdm") Call View.Sheets.RemoveAll() Call View.NewLayout() Set oMySheet = View.ActiveSheet oMySheet.Name = "MySheet" oMySheet.ActiveArea.DisplayObjType = "CurveChart2D" Set oMyChart = oMySheet.ActiveArea.DisplayObj Set oMyCurve = oMyChart.Curves2D.Add("[1]/[1]","[1]/[2]")
Properties
See Also
Examples
Alignment Functions in DIAdem VIEW | Automatic Display of Harmonic Frequencies | Bird's Eye View Display | Calculating a Tangent to a Curve | Contour Display in DIAdem VIEW | Creating and Viewing Long Data Channels | Dynamic Display of Statistical Characteristic Values in DIAdem VIEW | Overlaying Objects in Videos | Planetary Motion | Synchronizing Videos and Data | Synchronizing Videos and Waveform Data | User Dialog Box in VIEW for the Calculation of the FFT and Harmonic Frequencies | Using a User Command to Calculate the Difference between the Y-Values | Various Display Modes in DIAdem VIEW | Vibration Data Analysis with Parallel Processing | Viewing and Automatically Analyzing Data