Object: ToolTip3DAxisContext

Download PDF

Updated2024-09-12
2 minute(s) read

The ToolTip3DAxisContext object provides information on a 3D axis system in DIAdem REPORT when DIAdem calls the event assigned to the OnAxisSystem3D for ToolTipEvents property. DIAdem calls this event if you press the shift key and move the mouse over a REPORT object.

Note To test the example script, you must first save the second script and register it as a user command in the dialog box that opens when you select Settings»Extensions»User Commands.

The following example creates a 3D axis system and assigns the user command MyToolTipEvent to the OnAxisSystem3D for ToolTipEvents property:

Copy script

Dim oMy3DAxisSystem, oMy3DCurve
Call Data.Root.Clear()
Call DataFileLoad(DataReadPath & "Report_Data.tdm","TDM","")
Call Report.NewLayout()
Set oMy3DAxisSystem = Report.ActiveSheet.Objects.Add(eReportObject3DAxisSystem,"My3DAxisSystem")
Set oMy3DCurve = oMy3DAxisSystem.Curves3D.Add(e3DShapeSurface, "MyNew3DCurve")
oMy3DCurve.Shape.XChannel.Reference = "[2]/[1]"
oMy3DCurve.Shape.YChannel.Reference = "[2]/[2]"
oMy3DCurve.Shape.ZChannel.Reference = "[2]/[3]"
oMy3DCurve.Shape.DataStructure = e3DDataStructureMatrix

'This event will be raised if the mouse is moved AND the shift key pressed 
Report.Events.ToolTip.OnAxisSystem3D = "MyToolTipEvent"
Call Report.Refresh()

If you press the shift key and move the mouse over the 3D axis system, the example displays the mouse position and the name and the type of the subobject over which you idle the mouse. The user command receives two parameters. The first parameter corresponds with the ToolTip3DAxisContext object and provides the information about the 3D axis system in DIAdem REPORT when you press the shift key and move the mouse over the 3D axis system. The second parameter is a text and corresponds with the tooltip for display:

Copy script

Sub MyToolTipEvent(Context,ToolTipText)
  Dim oSubObject
  Set oSubObject = Context.SubObject
  ToolTipText = "Sheet: " & Context.Sheet.Name & VBCrLf & "Sub object" & VBCrLf & "Name: " &  oSubObject.Name & VBCrLf & "Type: " & GetConstNameForREPORTSubObj(oSubObject, oSubObject.Type)
  ToolTipText = ToolTipText & VBCrLf & "X position: " & Context.Position.X & VBCrLf & "Y position: " & Context.Position.Y 
End Sub

Properties

AxisSystem3D | Position | Sheet | SubObject

DIAdem Help

Table of Contents

Object: ToolTip3DAxisContext

Properties

See Also