NI-Digital does not validate Bit Order for Capture Engine reconfiguration
If multiple capture waveforms are used within a single session, the NI-Digital driver should validate Sample Width, Pins, Waveform Type (Serial/Parallel), and Bit Order (MSB/LSB) to determine if the Capture Engine must be reconfigured. The Bit Order setting is not being validated. This means that if the two capture waveform configurations differ in Bit Order and the other 3 settings are consistent, then no reconfiguration will take place and the data for one of the waveforms will be returned with incorrect bit order..
Workaround: Configure all waveforms to be a consistent Bit Order and reorder in software as necessary. Alternatively, close and create a new NI-Digital session between waveforms with settings that differ only in Bit Order.
|Reported Version: 17.0
||Resolved Version: N/A