1:00 AM - 6:00 AM CST on Saturday, January 23 까지 ni.com 웹사이트의 업그레이드로 인해 일시적인 서비스 장애가 있을 수 있습니다. 온라인 기능 향상을 위한 NI의 노력에 고객님들의 양해 부탁드립니다.

NI sbRIO-9651 System on Module Reference Carrier Board Design Files

The System on Module (SOM) Development Kit includes a full-featured reference carrier board to help you develop your embedded application. This white-paper includes the reference carrier board design files as a starting point as you begin design for your custom carrier board.For questions or help developing a custom carrier board please reference the NI sbRIO-9651 System on Module Carrier Board Design Guide or request help from the Hardware Developers Community for NI Single-Board RIO and System on Module.


Figure 1. Reference carrier board for the NI SOM.


The connectors on the reference carrier board are representative of connectors that NI has used and validated for high shock and vibration environments. The connectors and the NI SOM have been tested to industry specifications and are recommend, where possible, for rugged environments. Exceptions to this recommendation are the power input barrel jack and Peripheral Module (Pmod) headers, which have designs that are not positive-locking or do not provide strain relief.


Reference Carrier Design Files Included

  • PCB Gerber files and fabrication drawing
  • Schematic
  • Bill of Materials (BOM)
  • Detailed pin assignments


Peripherals Implemented

  • Gigabit Ethernet
  • USB Host
  • USB Device
  • SDHC Card
  • RS232
  • RS485
  • CAN


Additional Resources