NI 9514/16上连接AKD Drive Cable的x8接口的引脚是什么?
硬件: CompactRIO>>Drive Interface Modules>>NI 9514, CompactRIO>>Drive Interface Modules>>NI 9516, Motion Control>>Power Drives>>P00306EC, Motion Control>>Power Drives>>P00306AN, Motion Control>>Power Drives>>P00606AN, Motion Control>>Power Drives>>P00606EC
问题: 我想手动将NI 9514/16上的连接到AKD Drive Cable的x8端口上的有色线手动连接到Kollmorgen AKD Drive上的x8接口,有色线上的x8端口上的每个引脚应该连到哪儿呢?
解答: 有时,NI 9514/16上连接至AKD Drive Cable的x8接口是在一个过模制的接口里面,这时就不关心连线了,如果你需要手动将10根有色线连接到Kollmorgen AKD Drive上,请参照下方指示
Note:这些连接不同于NI的UMI to AKD Drive Cables 以及NI 9512 to AKD Drive Cable
x8 Combicon Pin Number |
Wire Color |
Pin Assignment |
1 |
Yellow |
Fault |
2 |
Orange |
Fault |
3 |
Blue |
DGND |
4 |
Brown |
ENABLE |
5 |
No Connect |
Digital IN6 (NSTOP) |
6 |
No Connect |
Digital IN5 (PSTOP) |
7 |
Black |
AGND |
8 |
No Connect |
Analog Out + |
9 |
Gray |
Analog In - |
10 |
Red |
Analog In - |
更详细的参考,Kollmorgen ADK Drive的x8端口连线图如下:
相关链接: Product Manuals: Getting Started with NI 9514/16 C Series Modules and AKD Servo Drives (August 2010)
附件:
报告日期: 04/25/2014
最近更新: 02/27/2015
文档编号: 6KOFO2NN
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.