From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
This document provides instructions for obtaining legacy support for Measurement Studio C++ MFC for use in Microsoft Visual Studio 2010 and 2012.
NI removed MFC C++ support from Measurement Studio in version 2010. Measurement Studio C++ MFC legacy support is only for use by customers who have an active Measurement Studio software subscription or a valid service agreement.
Before installing a version of Measurement Studio C++ MFC legacy support, you must first install the corresponding edition of Measurement Studio and the C++ Legacy Support Dependencies.
This can be done in the features tree of the Measurement Studio installer as follows:
Visit the Measurement Studio C++ MFC legacy support download page and select your edition of Measurement Studio to download the software.
Once you have the software downloaded to your system, follow the instructions provided in the Installation Instructions section of the Measurement Studio C++ MFC download page.
The installer will prompt for a password. The table below contains the passwords for each version of the Measurement Studio C++ MFC Legacy Support.
Measurement Studio MFC Version | Password |
---|---|
Measurement Studio C++ MFC 10 Standard | F9B9FA1BBF |
Measurement Studio C++ MFC 10 Professional | B6BF6669AF |
Measurement Studio C++ MFC 10 Enterprise | 3C02FF4916 |
Measurement Studio C++ MFC 11 Standard | 12569FC821 |
Measurement Studio C++ MFC 11 Professional | 4DA22BA19B |
Measurement Studio C++ MFC 11 Enterprise | 5095DE0224 |