NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
Archived: NI System Driver Set April 2008
Contents
Support
The NI System Driver Set April 2008 provides the drivers that were available at (or about the time of) the launch of NI LabVIEW Version 8.5.1.
Contents
The following drivers are included in the April 2008 set:
Data Acquisition
- NI-DAQ 8.7.1f31
- Traditional NI-DAQ 7.4.4
- NI-435x 2.5.2
Instrument Control
- NI-488.2 2.5.2
- NI-VISA 4.31
- NI-Serial 3.31
- IVI Compliance Package 3.21
- NI-Sync 3.0.02
- PXI Platform Services 2.3.21
Modular Instruments
- NI-Switch 3.7.11
- NI-DMM 2.81
- NI-Scope 3.41
- NI-RFSA 2.0.61
- NI-PXI-5660 Support
- NI-FGEN 2.5.11
- NI-DCPower 1.2.11
- NI-RFSG 1.3.11
- NI-HSDIO 1.5.31
- NI-5690 1.0.61
Reconfigurable IO
- NI-RIO 2.4.11
Motion and Vision
- NI-Motion 7.61
- NI-IMAQ 4.02
- NI-IMAQdx 3.1.21
- NI-IMAQ I/O 2.11
Distributed I/O
- NI-FieldPoint 6.0.12
Real-Time and Embedded
- NI-488.2 2.5.2
- NI-Serial 3.31
Communication Buses and Protocols
- NI-CAN 2.5.21
- NI-DNET 1.6.11
- I2C & SPI
- NI-845x 1.1.11
NI LabVIEW SignalExpress 2.5.11
NI Measurement & Automation Explorer 4.4.11
1NOTE: Minor update from NI System Driver Set May 2007.
2NOTE: Major update from NI System Driver Set May 2007.
Download
To download the April 2008 set, run the downloader attached to this document.
Customize Your CompactRIO System