NI-Industrial Communications for EtherCAT and LabVIEW Compatibility

Overview

This page shows supported versions of NI-Industrial Communications for EtherCAT and LabVIEW development systems. Reference this information to ensure you install the correct toolkit version when upgrading or updating your system or software. Using incompatible versions may result in errors, or missing LabVIEW palettes or functions.

NI-Industrial Communications for EtherCAT and LabVIEW Compatibility

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

Use this table to compare NI-Industrial Communications for EtherCAT and LabVIEW Compatibility
NI IndCom for EtherCATLabVIEW Version
2023 Q12022 Q320212020 SP120202019 SP120192018 SP120182017 SP1
2023 Q1      
21.5    
20.0    
19.0       
18.5        
18.0        
17.6         
17.0          
16.1          
16.0          


Note: It is always recommended to have the latest version of the driver, as this will include up-to-date support of new hardware and new versions of software.
Note: NI-RIO is a requirement for NI-Industrial Communications for EtherCAT, so NI-Industrial Communications for EtherCAT and LabVIEW compatibility is determined based on the NI-RIO version being used. Make sure consult the NI-RIO and LabVIEW compatibility page as well as the NI-Industrial Communications for EtherCAT and NI-RIO compatibility page.

Compatible

Was this information helpful?

Yes

No