Archived: NI-Industrial Communications for CANopen and LabVIEW Compatibility

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview

This page shows supported versions of the NI-Industrial Communications for CANopen hardware driver with LabVIEW development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

NI-Industrial Communications for CANopen (32-bit) and LabVIEW Compatibility

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

For information about NI driver and development software compatibility after 2023 Q3, please refer to NI Driver and Development Software Compatibility.

Use this table to compare NI-Industrial Communications for CANopen (32-bit) and LabVIEW Compatibility
NI Ind Com for CANopenLabVIEW Version
2021202020192018 SP12017 SP12016 SP12015 SP12014 SP12013 SP12012 SP1
2022 Q41       
21.5      
20.0      
19.0      
18.0      
17.0      
16.0      
15.0      
14.52       
1.0.3        
1.0.2         


1 You can choose to use NI-Industrial Communications for CANopen (32-bit) 2022 Q4, with LabVIEW 2019 or any later version.

2 CANopen 14.5 is no longer available on the web. Please see the additional resource section below for details.

Compatible (32-bit only)

Was this information helpful?

Yes

No