NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
Note: NI-RIO Version 14.5 is the last version of this driver. Starting with LabVIEW 2015, NI-RIO has been split into three separate installers. CompactRIO Device Drivers (supports CompactRIO and Single-Board RIO), R Series Multifunction (supports R Series cards), and FlexRIO (supports FlexRIO boards).
This page shows the installed versions of Measurement & Automation Explorer (MAX) with NI-RIO. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).
| NI-RIO Version | MAX Version |
|---|---|
| 14.5 | 14.5.0 |
| 14.0.1 | 14.0.0 |
| 13.1 | 5.6.0 |
| 13 | 5.5.0 |
| 12.1 | 5.4.0 |
| 12 | 5.3 |
| 4.0.0 | 5 |
| 3.6.1 | 4.7.7 |
| 3.6.0 | 4.7.7 |
| 3.5.1 | 4.7 |
| 3.5.0 | 4.7 |
| 3.4.0 | 4.6.2 |
| 3.3.1 | 4.6.2 |
| 3.3.0 | 4.6.2 |
| 3.2.1 | 4.6.1 |
| 3.2.0 | 4.6 |
| 3.1.1 | 4.5.1 |
| 3.1.0 | 4.5.1 |
| 3.0.1 | 4.5 |
| 3.0.0 | 4.5 |
| 2.4.1 | 4.4.1 |
| 2.4.0 | 4.4 |
| 2.3.1 | 4.3 |
| 2.3.0 | 4.3 |
| 2.1.3 | 4.2.1 |
| 2.1.2 | 4.2 |
| 2.1.1 | 4.2 |
| 2.1.0 | 4.1 |
| 2.0.2 | 4 |
| 2.0.1 | 4 |
| 2.0.0 | 4 |
| 1.3.1 | 3.1.1 |
| 1.3.0 | 3.1.1 |
| 1.2 | 3.1.1 |
| 1.1.1 | 3.1.1 |
| 1.1.0 | 3.1 |