The following items are notable issues fixed between the release of Sound and Vibration 2019 and Sound and Vibration 2020, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of Sound and Vibration 2020.
|
Bug Number |
Legacy ID |
Description |
Details |
|---|---|---|---|
| 271306 | 602175 |
Different generation and acquisition rates result in buffer parsing errorsWorkaround: There is currently no known workaround for this issue. |
Reported Version: LabVIEW Sound and Vibration Toolkit 2016 Resolved Version: LabVIEW Sound and Vibration Toolkit 2020 Added: Apr 24, 2017 |
| 943122 |
Sound and Vibration Toolkit 2019 Removes Previous Toolkit Versions During InstallationInstalling Sound and Vibration Toolkit 2019 removes previous versions of the toolkit.
Workaround: Install Sound and Vibration Toolkit 2019.0.1 and reinstall previous Sound and Vibration Toolkits.
|
Reported Version: LabVIEW Sound and Vibration Toolkit 2019 Resolved Version: LabVIEW Sound and Vibration Toolkit 2020 Added: Jan 21, 2020 |
|
| 943602 |
Sound and Vibration Toolkit 2019 Breaks Compatibility with PharLap TargetsSound and Vibration functions cannot be deployed to PharLap targets.
Workaround: Reach out to National Instruments Support and reference this issue for a detailed workaround.
|
Reported Version: LabVIEW Sound and Vibration Toolkit 2019 Resolved Version: LabVIEW Sound and Vibration Toolkit 2020 Added: Jan 9, 2020 |
|
| 271313 |
Audio measurements return incorrect values when fundamental is on bin and FFT window = NoneAudio measurements return incorrect values if the fundamental frequency of a signal is on bin and the FFT window has been set to "None." Workaround: Wire in the expected frequency to audio measurement VI and set "advanced span" input to 0 |
Reported Version: LabVIEW Sound and Vibration Toolkit 2016 Resolved Version: LabVIEW Sound and Vibration Toolkit 2020 Added: Apr 26, 2019 |
|
| 309914 |
Max/Min Functionality Added into the Harmonic Distortion and Noise VIMax/Min functionality added within the Harmonic Distortion and Noise VI to ensure we never return a negative SINAD value. Workaround: There is currently no known workaround for this issue. |
Reported Version: LabVIEW Sound and Vibration Toolkit 2019 Resolved Version: LabVIEW Sound and Vibration Toolkit 2020 Added: Oct 3, 2019 |
Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.
These patches currently do not have any special instructions.