ECU Measurement and Calibration Toolkit 20.6 Bug Fixes

Overview

The following items are notable issues fixed between the release of ECU Measurement and Calibration Toolkit 20.0 and ECU Measurement and Calibration Toolkit 20.6, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of ECU Measurement and Calibration Toolkit.

Bug Number

Legacy ID

Description

Details

977921

Application Crashes if an ECU Sends Unaligned Frames with PACKET_ALIGNMENT > 1

A crash occurs when an ECU sends frames with a frame length that is not aligned to the PACKET_ALIGNMENT setting in the A2L file.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

ECU Measurement and Calibration Toolkit 19.5

Resolved Version:

ECU Measurement and Calibration Toolkit 20.6

Added:

Nov 19, 2020

1102466

Memory Leak When NI-XNET Echo Transmit is Active on the Same Port

A memory leak can occur when an ECUMC session is used on the same interface on which an NI-XNET session was used with the interface option "Interface:Echo Transmit?" set to ON.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

ECU Measurement and Calibration Toolkit 20.1

Resolved Version:

ECU Measurement and Calibration Toolkit 20.6

Added:

Nov 19, 2020

Additional Patch Information

Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.

These patches currently do not have any special instructions.

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).