The following items are known issues in NI-DCPower 18.5 sorted by severity.
ID | Known Issue | |||||
---|---|---|---|---|---|---|
480527 | Upgrading from Windows 8.0 to Windows 8.1 can result in lost configuration information Upgrading the version of Windows on a system with NI-DCPower installed may result in the loss of device names, the loss of device configuration, and/or devices appearing disconnected. For more information on how to resolve this, visit ni.com/info and enter the Info Code 'excrxm'. Workaround: Reconfigure your devices in Measurement & Automation Explorer.
| |||||
282622 | SignalExpress 1.2 or earlier and the IVI Power Supply step The IVI Power Supply step does not support NI-DCPower in Signal Express 1.2 or earlier. Workaround: Use the native NI-DCPower Express step to access NI-DCPower from within SignalExpress 1.2 or earlier. In SignalExpress 2.0 or later, you can use either the IVI Power Supply step or the NI-DCPower Express step.
|
Contact NI regarding this document or issues in the document. If you contact NI in regards to a specific issue, reference the ID number given in the document. The ID number contains the current issue ID number as well as the legacy ID number (use the current ID number when contacting NI). You can contact us through any of the normal support channels including phone, e-mail, or the discussion forums. Visit the NI Website to contact us. Also contact us if you find a workaround for an issue that is not listed in the document.