Vision Development Module 2017
ID | Fixed Issue |
---|---|
622833 | The QR code C API crashes when the image is incomplete or cut-off. |
508131 | With certain type of images, geometric pattern matching cannot find the part unless it is looking for 2 matches or the occlusion is greater than 25 degrees. |
616143 | When Vision Assistant generates code, the order of array elements does not respect the order defined in the array constant. Min Char Size and Acceptance Level are swapped. |
580508 | Including niimaq.h, nivision.h, and nimaqdx.h headers in the same .c file will result in a compiler error. |
413157 | When NI License Manager is called from a LabVIEW VI or built application to extend the evaluation period of Vision software products, it cannot contact the necessary remote server. |
617250 | When a color image is opened in the Vision Assistant OCR/OCV step, the OCR Training Interface can be invoked and the image can be thresholded, but when the character set file is saved, the settings are not applied and the threshold parameters are grayed out. |
413948 | When using the Vision Acquisition Express VI and the IMAQ Dispose VI with the All Images input set to TRUE, certain processing steps cause error -1074396120 on the second run of the code. |
616865 | Code generated from the Vision Assistant Acquire Images (Smart Camera) step uses NI-IMAQ when it should be using NI-IMAQdx. |
612148 | When the Create Destination Image checkbox is enabled from the Select Controls section of the Vision Assistant Express VI, the VI will not pass through errors. |
613846 | When generating LabVIEW code from the Threshold step, the Sauvola Deviation parameter is not set to the value specified by the user. |
631834 | The code generated for the Vision Assistant Image Mask step can produce the inverse of the mask defined when configured to create a mask from an image file when you choose to mask pixels that are inside the ROI. |
613248 | Cannot edit or relearn calibrations at each iteration in the Vision Assistant Image Calibration step. |
Vision Development Module 2017 SP1
ID | Fixed Issue |
---|---|
667917 | IMAQ LV_MatchGeometricPattern_v3 causes LabVIEW 2017 to crash. |
655018 | Data Matrix decodes wrong symbols under certain lighting conditions. |
648887 | IMAQ File Write2 takes 10-100 times longer when the angle of rotation of image goes from negative to positive |
648634 | Applying BCG lookup and calling IMAQ Read QR Code VI causes LabVIEW to crash |
636682 | Find Pattern 4 VI causes memory leak which can cause LabVIEW to freeze. |
661191 | IVA Check Coordinate System Valid 2.vi and IVA Check Coordinate System Valid.vi uses AND array elements instead of OR, recognizes faulty input systems as valid |
671212 | When called from Vision Assistant, the Template Editor uses different display mapping options than the ones defined in the preferences, sometimes resulting in a black image in the Template Editor. |
668990 | Vision Assistant 32-bit cannot generate code for LabVIEW 64-bit, if LabVIEW 32-bit is not installed. |
668197 | The Object Tracking step does not work on binary images, but can still be selected if a binary image is displayed. |
653366 | The Vision Assistant Pattern Matching step parameter "Pyramid Level" automatically reverts to the Optimal Pyramid Level when editing the step. |
644211 | In Vision Assistant, the Color Palette of the previous step was overwritten when you changed the palette on a new step and cancel it. |