NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
This document contains known issues that were discovered before and since the release of the Sound and Vibration Toolkit 2012 and Sound and Vibration Measurement Suite 2012. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered.
| ID | Known Issue |
|---|---|
| 331984 | The integration filter introduces unexpected phase shift. |
| 353396 | Shaft centerline plot XControl clears Undo chain. |
| 356478 | Digital tacho processing shows inconsistent reset behavior on FPGA and RT. |
| 353722 | Sound & Vibration Assistant - Orbit and timebase step causes DAQmx buffer overflow with default timing settings. |
| 363294 | Sound & Vibration Assistant - Spectral Map step may display gaps in properly formatted data sets. |
© 2012 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or ni.com/patents.