From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Archived: Sound and Vibration Toolkit 2010 & Sound and Vibration Measurement Suite 2010 Known Issues

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview

This document contains known issues that were discovered before and since the release of the Sound and Vibration Toolkit 2010 and Sound and Vibration Measurement Suite 2010. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered.

Known Issues

Sound and Vibration VIs

  • SVPO Order Metrics for Periodic Inspection VI returns inf speed if the number of passing revolutions is less than integration cycles
  • Standardized Filter Express VI returns error on execution if 'unwrap phase' checked.
  • Changing "number of channels" in Orbit Express VI will increase the memory usage significantly.

 

X Control

  • Timebase XControl tree legend flickers when copied to another blank VI and run continuously.

 

UFF58 File I/O

  • The UFF58 plug in does not support localized operating systems.
  • The Uff58 plug in cannot open UFF58 files that contain Japanese characters.  The file name can be in Japanese, but the file text cannot.

 

Sound and Vibration Assistant

  • Power in Band reports incorrect x-axis scale label and units when charted.
  • User step with octave output does not display in octave table viewer.
  • A group of proximity channels with different units causes problems for the SVA steps and viewers.

 

opyright

© 2010 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or ni.com/patents.

Additional Resources

  • LabVIEW 2010 Sound and Vibration Analysis VIs Readme
  • NI Sound and Vibration Assistant 2010 Readme

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).