Home Support Documentation Bugs

Archived: NI-WSN 1.0.2 Known Issues

Updated Mar 10, 2020

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview



This document contains the NI-WSN 1.0.2 known issues that were discovered before and since the release of NI-WSN 1.0.2. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered.

Known Issues

The following items are known issues for NI-WSN 1.0.2.

CAR IDCAR DescriptionWorkaround
176348Deploying Configuration while running a VI causes VI to temporarily return invalid dataStop VI before deploying configuration
176451Firmware version in MAX does not distinguish programmed nodes from non-programmed nodes. 
176328Gateway will not send IO configuration message if incorrect node type is deployedEnsure proper node type is deployed
176245Switching Router/End Node on a node that has never connected throws Unknown ErrorAllow node to connect before switch radio firmware
171234Adding a remote WSN Gateway to MAX requires user to manually refresh the WSN Node Tab in MAXManually refresh MAX
156917MAX does not show progress of node firmware update without manual refreshManually refresh MAX
154363Changing Node ID in Does Not Update Node NameWhen changing ID, also update node name
176579Setting invalid gateway name in LabVIEW causes blank errorInsure valid name is entered
175432Comparing Project with gateway yeilds error: Sample Interval "5.000" != "5.000"Deploy the settings as coerced by the display
174982Windows 2000 does not display some drop down lists correctly 
174980End Nodes remain on longer than anticipated when it has failed to join a network 
159167Cannot Change Node Type (3202, 3212) After Node has been AddedEnsure proper node type is selected when adding

 

Additional Resources

Back to top

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).