| ID | Fixed Issue | Fixed Version |
|---|---|---|
| 103875 | viPrintf and variants did not support the %@2 identifier when using short integer arrays nor the %@3 identifier when using any arrays | 4.4 |
| 114300 | In MAX, VISA options may not reflect manual modifications made to visaconf.ini | 4.4 |
| 92346 | The C examples would build with warnings when using Microsoft Visual C++ 2005 or higher | 4.4 |
| 93267 | VISA may crash when trying to close a session in use by a different thread | 4.4 |
| 132397 | In the VISA COM driver, attribute accessing functions returning a VARIANT_BOOL now return VARIANT_TRUE (-1) instead of VI_TRUE (+1) when the specified attribute is true. This applies for all functions except the raw GetAttribute call, which will continue to return VI_TRUE | 4.5 |
| 93245 | VISA resources on a CVS target did not appear in the MAX tree | 4.5 |
| 121227 | Previously, MAX would crash when expanding the "Serial & Parallel" tree item if the settings for a port in VISA are different than those in Windows Device Manager | 4.5 |
| 105351 | Calling viFindRsrc using 64-bit VISA may cause a command window to flash on the screen | 4.5 |
| 112150 | Previously, it was not possible to disable 64-bit passports | 4.5 |
| 89395 | Searching for VXI-11 resources may not find some instruments when multiple Ethernet interfaces are present | 4.5 |
| 135045 | The nimdnsResponder service may corrupt the routing table | 4.5.1 |
| 177456 | On LabVIEW RT (Phar Lap ETS), trying to set the attribute VI_ATTR_TCPIP_NODELAY on a TCPIP SOCKET session to VI_FALSE returned an error | 4.6 |
| 165973 | When closing a TCPIP INSTR session for which an interrupt channel has been established, NI-VISA would not explicitly close the interrupt channel | 4.6 |
| 88858 | On Windows Vista, an NI-VISA application communicating to a USBTMC device may cause system crash (blue screen) if the device firmware hits a debug assertion | 4.6 |
| 186322 | When building installers from NI software, VISA 4.6 components were incorrectly labeled as version 4.5 in the installer properties dialog | 4.6.1 |
| 195038 | Improper message displayed when using VISA Driver Development Wizard to install a driver on Mac OS X without elevated privileges, indicating the driver cannot be installed | 5.0 |
| 208212 | viStatusDesc causes a memory leak on Linux | 5.0 |
| 233365 | VISA Driver Development Wizard does not install composite USB device drivers correctly | 5.0 |
| 185549 | GPIB passport always returns VI_SUCCESS_DEV_NPRESENT if ibln is disabled | 5.0 |
| 173379 | Real-time support of some NI software may fail to install if NI-VISA is already installed | 5.0 |
| 154617 | VISA does not recognize the serial number of some USB RAW devices | 5.0 |
| 244124 | USB communication timeout cannot be set to values greater than 60 seconds | 5.0.2 |
| 258031 | USB RAW control requests always timeout after 5 seconds | 5.0.4 |
| 207832 | VISA Read To File does not write text to file on Mac OS X | 5.1 |
| 247629 | TCP/IP resources cannot only have numbers in LAN device name | 5.1 |
| 285159 | NI 3110 is not listed under VISA Remote Systems | 5.1 |
| 354588 | Calls to viLock fail after lock is set in a program that crashes. | 5.4 |
| 375426 | NI-VISA 5.2 cannot communicate with some third party Ethernet GPIB devices. | 5.4 |
| 382487 | .NET 4.5 Examples for VisaNS are not installed | 5.3 |
| 388578 | TCP/IP INSTR resources cannot be added in MAX if the LAN device name only contains numbers. | 5.4 |
| 393875 | Using VISA asynchronous writes along with VISA events in LabVIEW may cause corrupted data to be written to the serial port. | 5.4 |
| 404486 | Removing and reconnecting a USB device that has interrupt enabled causes a system crash on VxWorks. | 5.4 |
| 409398 | GPIB instruments improperly labeled as Not Present in NI Web-base Configuration & Monitoring | 5.4 |
| 420012 | In VISA Interactive Control, File»Exit closes all open sessions regardless of selection. | 14.0 |
| 437513 | When opening a session with serial devices that don't support events on Linux operating systems, NI-VISA throws an Unknown System error. | 14.0 |
| 454512 | Accessing the built-in serial ports on an NI cRIO-9068 using the VISA property node returns error -1073807343 in NI-VISA 5.4.1. | 14.0 |
| 182027 | Setting serial baud rate with NI-VISA may return errors from third-party serial drivers. | 15.0 |
| 242354 | VISA always adds a parallel port resource even if the system does not have a parallel port. | 15.0 |
| 543928 | Extra 0xFF characters may be received when using NI-VISA to read from serial ports on Linux RT targets. | 15.0.1 |
| 580283 328827 | Opening a session to VISA resources with resource names longer than 249 bytes can cause LabVIEW or NI MAX to crash. Special thanks to Frederick Angstadt for bringing this issue to the attention of NI. | 16.0 |
| 536772 | Connection to HiSLIP devices may be dropped if HiSLIP data message contains MessageID parameter of 'None' (0xFFFFFFFF) | 16.0 |