Ni.com is currently experiencing issues that may cause some pages to fail.
Support teams are actively working on the resolution.
Ni.com is currently experiencing issues that may cause some pages to fail.
Support teams are actively working on the resolution.
1-Channel Direct Injector Control and Measurement Device—The DCM-2301 can control injector and fuel systems, accommodating one piezoelectric or two solenoid direct injectors. This device has a boost supply up to 220 V and a peak current of 40 A, providing fault protection and detection. You can control an entire fuel system with this device, using the built-in oscilloscope for recording injector voltage and current waveforms. The DCM-2301 allows you to define current and voltage profiles at rates up to 2 injections per cycle per injector with advanced waveform generation and triggering capabilities.