Use the Database Viewer to select and view database files.

Viewing a Restbus Simulation Database File

Complete the following steps to view a restbus simulation database file:
  1. Open the WebUI.
  2. Click Database » RestBus.
  3. Select a database file.
  4. Click View Database File for a detailed view.
  5. Select a bus cluster before selecting a specific cluster for that bus.
    Note The information displayed depends on the content from your file and the bus type displayed. You see different information depending on whether you are looking at a CAN, LIN, or Automotive Ethernet cluster. This example procedure shows what you can find in an Automotive Ethernet cluster.
  6. Choose one Virtual LAN (VLAN) under the Cluster Channels list.
    Two new tabs appear:
    • PDUs: Select a PDU name to view included signals. Select a signal to display its information on the right side of the window.
    • ECUs: Select the ECU tab to view ECUs included in this part of the communication. Select an ECU name to display TX and RX headings, where all the PDUs that are transmitted (TX) and received (RX) are listed.