Complete the following steps to validate an Switch Executive virtual device:

  1. Launch MAX with Switch Executive.
  2. Expand Devices and Interfaces»Switch Executive Virtual Devices.
  3. Select the virtual device you want to validate.
  4. Click on the Switch Executive taskbar in MAX. A dialog box opens.
  5. (Optional) Select the Use Simulation Mode checkbox to simulate connections during validation.
    Note Simulation mode simulates the configuration of your virtual device, performs a valid system check, and reduces the wear and tear on switch relays. Simulation mode does not physically communicate with your switches.
    Caution If you do not use Simulation mode, ensure that you have disconnected any fixturing or wiring that might be damaged by connecting all of your routes and route groups.
  6. Click the checkbox items you want to validate: IVI Configuration, Routes, and/or Route Groups.
  7. Click Next. A window displays the validation status of the items in your configuration and if the validation passes or fails.
  8. Proceed to step 9 if the validation test passes. If the validation status includes any errors, correct the configuration and repeat steps 4 through 7.
  9. Click Finish. Now you can program and/or deploy the virtual device.
  10. Click on the Switch Executive taskbar to save the configuration.