Connector Pin to Bank Element Translation Table

Use Table 5 to match bank element names as shown in Figure 6.

Figure 6. Example Connector Pin to Bank Element Translation

1378

Table 5. Connector Pin to Bank Element Translation
Bank # Bank Element Name HM Type A (ref)[1]1 This is the Fully-Compatible Rear I/O pinout for the XJ2/XP2 module defined in the SLSC Module Design Specifications and SLSC RTI Design Specifications. It is included here for reference. [2]2 There is no distinction between REF and AUX pins on these connectors; they are all shorted to GND A and/or GND B (depending on module and RTI configurations). Column F (not shown here) on the HM connector is GND A and/or GND B. DB-44/HD44 MDR26[3]3 There is no distinction between REF and AUX pins on these connectors; they are all shorted to GND A and/or GND B (depending on module and RTI configurations). Column F (not shown here) on the HM connector is GND A and/or GND B. ix Industrial 10p Nano-Fit DB9/DE9 [4]4 This connector isn't fully-compatible with this standard (lacking the REF pin), but is widely used, so a default pinout is included here.
pin pin pin pin pin pin
1 A A1 1 2 1 10 4
B B1 16 3 2 5 5
C D1 2 15 4 9 3
D E1 17 16 5 4 7
E A2 3 5 6 7 2
F B2 18 6 7 2 6
G D2 32 18 9 6 8
H E2 31 19 10 1 9
I (REF) A3, B3, C3, D3, E3 (GND A) 33 1, 4, 7, 14, 17 3 3 (none)
J (AUX) 19 — 8 8 1
2 A A4 5 8 None
B B4 20 9
C D4 6 21
D E4 21 22
E A5 7 11
F B5 22 12
G D5 36 24
H E5 35 25
I (REF) A6, B6, C6, D6, E6 (GND A) 34 10, 13, 20, 2, 3, 26 (GND A/B)
J (AUX) 4
3 A A7 9 None
B B7 24
C D7 10
D E7 25
E A8 11
F B8 26
G D8 40
H E8 39
I (REF) A9, B9, C9, D9, E9 (GND A) 41
J (AUX) 27
4 A A10 13 None
B B10 28
C D10 14
D E10 29
E A11 15
F B11 30
G D11 44
H E11 43
I (REF) A12, B12, C12, D12, E12 (GND A) 42
J (AUX) 12
5 A A15 None
B B15
C D15
D E15
E A16
F B16
G D16
H E16
I (REF) A17, B17, C17, D17, E17 (GND B)
J (AUX)
6 A A18 None
B B18
C D18
D E18
E A19
F B19
G D19
H E19
I (REF) A20, B20, C20, D20, E20, (GND B)
J (AUX)
7 A A21 None
B B21
C D21
D E21
E A22
F B22
G D22
H E22
I (REF) A23, B23, C23, D23, E23 (GND B)
J (AUX)
8 A A24 None
B B24
C D24
D E24
E A25
F B25
G D25
H E25
I (REF) A23, B23, C23, D23, E23, (GND B)
J (AUX)

OBSERVATION—Future hardware development is expected to focus on ix Industrial and DB-44/HD44 connectors, with very limited development for MDR26 and Nano-Fit hardware.

1 This is the Fully-Compatible Rear I/O pinout for the XJ2/XP2 module defined in the SLSC Module Design Specifications and SLSC RTI Design Specifications. It is included here for reference.

2 There is no distinction between REF and AUX pins on these connectors; they are all shorted to GND A and/or GND B (depending on module and RTI configurations). Column F (not shown here) on the HM connector is GND A and/or GND B.

3 There is no distinction between REF and AUX pins on these connectors; they are all shorted to GND A and/or GND B (depending on module and RTI configurations). Column F (not shown here) on the HM connector is GND A and/or GND B.

4 This connector isn't fully-compatible with this standard (lacking the REF pin), but is widely used, so a default pinout is included here.