RFmxWcdmaMXQevmResults.GetMeanChipRateError Method

public int GetMeanChipRateError(
	string selectorString,
	out double value
)

Public Function GetMeanChipRateError ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString  String

Specifies the result name.
Example: ""

"result::r1"

You can use the BuildResultString(String) method to build the selectorString.

value  Double

Upon return, contains the mean of the chip rate errors for a QPSK signal. This value is expressed in ppm. This value is obtained by averaging the chip rate errors over all averaging acquisitions. The number of acquisitions is specified by the value of the SetAveragingCount(String, Int32) method.The chip rate error is the estimated error between the chip clock rate of the transmitted signal and the chip clock rate at the receiver.

Return Value

Reference