RFmxWcdmaMXAcpResults.FetchOffsetMeasurement Method

public int FetchOffsetMeasurement(
	string selectorString,
	double timeout,
	out double lowerRelativePower,
	out double upperRelativePower,
	out double lowerAbsolutePower,
	out double upperAbsolutePower
)

Public Function FetchOffsetMeasurement ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef lowerRelativePower As Double,
	<OutAttribute> ByRef upperRelativePower As Double,
	<OutAttribute> ByRef lowerAbsolutePower As Double,
	<OutAttribute> ByRef upperAbsolutePower As Double
) As Integer

Parameters

selectorString  String

Specifies a selector string comprising of the result name, and offset number. If you do not specify the result name, the default result instance is used. Example:
"offset0"
"result::r1/offset0"
You can use the BuildOffsetString(String, Int32) method to build the selector string.

timeout  Double

Specifies the time for which the method waits for the measurement to complete. This value is expressed in seconds. A value of -1 specifies that the method waits until the measurement is complete.

lowerRelativePower  Double

Upon return, contains the offset channel power measured relative to the power of the carrier(s) that you specify in the SetOffsetPowerReferenceCarrier(String, RFmxWcdmaMXAcpOffsetPowerReferenceCarrier) method.

upperRelativePower  Double

Upon return, contains the upper offset channel power measured relative to the power of the carrier(s) that you specify in the SetOffsetPowerReferenceCarrier(String, RFmxWcdmaMXAcpOffsetPowerReferenceCarrier) method. This value is expressed in dB.

lowerAbsolutePower  Double

Upon return, contains the lower offset channel power.

upperAbsolutePower  Double

Upon return, contains the upper offset channel power.

Return Value

Reference