RFmxWcdmaMXAcpResults.FetchTotalCarrierPower Method

public int FetchTotalCarrierPower(
	string selectorString,
	double timeout,
	out double totalCarrierPower
)

Public Function FetchTotalCarrierPower ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef totalCarrierPower As Double
) As Integer

Parameters

selectorString  String

Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used. Example:
""
"result::r1"
You can use the BuildResultString(String) method to build the selector string.

timeout  Double

Specifies the time for which the method waits for the measurement to complete. This value is expressed in seconds. A value of -1 specifies that the method waits until the measurement is complete.

totalCarrierPower  Double

Upon return, contains the sum of all active carrier powers, where each carrier power corresponds to the value of the GetCarrierAbsolutePower(String, Double) method. This value is expressed in dBm. For a single-carrier measurement, total carrier power is the same as carrier absolute power.

Return Value

Reference